I have been doing MIB searches all day and I can't find an OID that will give me a simple count of the number of inbound calls and the number of outbound calls with an H323 configured VG200. I have been looking into all objects in the CISCO-VOICE-DIAL-CONTROL MIB and I can't find this counter.
Thanks, but I have looked at all of the CISCO-VOICE-DIAL-CONTROL Objects and there isn't a OID that tells you how many calls are in/out via an integer. I am looking to make MRTG graphs for voice calls.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...