02-07-2002 02:38 AM - edited 03-12-2019 02:20 PM
Is there anybody who succesfully configured
Netmeeting v.2.11 in CCM 3.1(2C) enviroments.
Could you send me a link?
Thank you
02-07-2002 07:20 AM
I believe that you want to use 3.x version of netmeeting. I am not aware of a link but you would want to setup a new phone in callmanager as type h.323 client. I would make the device name the ip address of the netmeeting pc. Then in the netmeeting configure the gateway as the primary call processing callmanager's ip address and see what happens.
Let me know if this helps,
-Mckee
02-07-2002 01:24 PM
In addition to the first replay,
Please make sure to choose on the Netmeeting side prefered audio codec that is been support with your Cisco Gateway over H.323 protocol.
I can't remeber which codec excatly was it.
02-08-2002 02:48 AM
I installed netmeeting 3.01. Then added new phone in callmanager as type H.323 client with IP address of Netmeeting PC in Device name field. In the netmeeting I configured the gateway as the primary call processing CM's ip address and also checked
preferred audio codec. I changed codec type on Netmeeintg side to CCIT,u-law,8000Hz,8bit. Then i placed a call from Netmeeting to IP phone and after a while it showed this message :"The person you called is not able to accept Netmeeting calls".
What is the next step,please?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide