Other than AMIS via the analog ports of with the DPA via the digital connection is there any other way to interconnect the two VM systems together?<br><br>Which way is recommended over the other (ie. analog versus digita)?<br><br>Which integration requires the least or little modifications/programming on the Octel (The Customer policies allow that enterprise to NOT be able to play/program with the OCTEL much?<br><br>Does OCTELNET support in Unity remove and need to have to use AMIS to talk between to the VM systems ?<br><br><br>
Unity can talk to an Octel via AMIS -or- OctelNet. OctelNet is more feature rich but costs more because you need a Unity Bridge.
If the Unity server connecting via OctelNet will be replacing an Octel node, no changes in configuration are required on the other Octel nodes. The Unity Bridge will assume the serial number of the removed Octel node.
If Unity will not be replacing an Octel node you will need to ask Avaya, or whoever supports the Octel, how much they change to setup OctelNet vs. AMIS.
Keith Chambers Diagnostic Engineer Voice Network Team, San Jose Cisco Systems, Inc.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...