Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

No caller ID passed on tir-trunk

I'm migrating an old inter-tel axxess PBX to cisco voip.

I have the two system talking to each other over a trunk configured with primary-ni. Everything is working for the most part except that I am not getting caller ID info passed from inter-tel to cisco.

The gateway is an AS5350. The inter-tel phones are setup to call forward all to the tie-trunk

The call path is

PSTN-> Inter-tel -> phone -> Trunk -> AS5350 -> Callmanager.

When the Inter-tel phones are getting the call (no forward), the Caller ID is displayed properly on the LCD.

When the call is forwarded , the Caller ID doesn't show up on the AS5350.

Any idea what to look for?

I have exhausted all my ideas and settings I could play with.

Thanks

Apr 26 17:05:33 PDT: ISDN Se3/0:23 Q931: RX <- SETUP pd = 8 callref = 0x0001

Bearer Capability i = 0x8090A2

Standard = CCITT

Transfer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA98397

Exclusive, Channel 23

Called Party Number i = 0xA1, '7661'

Plan:ISDN, Type:National

Apr 26 17:05:33 PDT: ISDN Se3/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0x8001

Channel ID i = 0xA98397

Exclusive, Channel 23

Apr 26 17:05:33 PDT: ISDN Se3/0:23 Q931: TX -> ALERTING pd = 8 callref = 0x8001

Progress Ind i = 0x8188 - In-band info or appropriate now available

1 REPLY
Community Member

Re: No caller ID passed on tir-trunk

331
Views
0
Helpful
1
Replies
CreatePlease to create content