Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

No 'IP' in call hist voice brief

Hi Experts,

This is the output from our 3745 IP-IP gateway. All the call routing is fine and the call terminates OK. But when I give the command 'Show call history voice brief' , It will give IP 0.0.0.0, and it is not showing which IP it is going through.

Any special configurations are required ? Please let me know if so.

AA : 112173402hs.322483 +1232 +42864 pid:1 Originate 002511370973

dur 00:06:56 tx:0/0 rx:0/0 10 (normal call clearing (16))

IP 0.0.0.0:0 rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g723r63

AA : 112216392hs.322484 +-1 +1 pid:1 Answer

dur 00:00:00 tx:0/0 rx:0/0 1F (normal, unspecified (31))

IP 0.0.0.0:0 rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf

AA : 112216393hs.322485 +-1 +0 pid:1 Originate 002511370973

dur 00:00:00 tx:0/0 rx:0/0 1F (normal, unspecified (31))

IP 0.0.0.0:0 rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf

Regards,

Kiran

1 REPLY
Silver

Re: No 'IP' in call hist voice brief

I feel this is due to the bug CSCds20882. Please check the bug tool kit for more details. Hope you are familiar with the Output Interpreter tool in the Cisco.com. You can paste the output and analyse if you are missing something. It might help you pinpoint the problem.

113
Views
0
Helpful
1
Replies
CreatePlease to create content