cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
222
Views
0
Helpful
1
Replies

No 'IP' in call hist voice brief

happykiran
Level 1
Level 1

Hi Experts,

This is the output from our 3745 IP-IP gateway. All the call routing is fine and the call terminates OK. But when I give the command 'Show call history voice brief' , It will give IP 0.0.0.0, and it is not showing which IP it is going through.

Any special configurations are required ? Please let me know if so.

AA : 112173402hs.322483 +1232 +42864 pid:1 Originate 002511370973

dur 00:06:56 tx:0/0 rx:0/0 10 (normal call clearing (16))

IP 0.0.0.0:0 rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g723r63

AA : 112216392hs.322484 +-1 +1 pid:1 Answer

dur 00:00:00 tx:0/0 rx:0/0 1F (normal, unspecified (31))

IP 0.0.0.0:0 rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf

AA : 112216393hs.322485 +-1 +0 pid:1 Originate 002511370973

dur 00:00:00 tx:0/0 rx:0/0 1F (normal, unspecified (31))

IP 0.0.0.0:0 rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf

Regards,

Kiran

1 Reply 1

irisrios
Level 6
Level 6

I feel this is due to the bug CSCds20882. Please check the bug tool kit for more details. Hope you are familiar with the Output Interpreter tool in the Cisco.com. You can paste the output and analyse if you are missing something. It might help you pinpoint the problem.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: