Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

No Ringback on IP phones when dialling ATA186's

We have a Call Manager version 3.1.2c with ATA186's version 2.12. ATA186 running as a H323 gateway with route patterns. If you dial from the IP phone to the ATA186 the analogue phone will ring but the IP phone will not here any ringback tone. The other direction is OK.

Can anyone help??

2 REPLIES
New Member

Re: No Ringback on IP phones when dialling ATA186's

On the dial-peer voip you need

progress_ind setup enable 3

!

on the Pots

dial-peer voice 200 pots

progress_ind alert enable 8

that should solve the problem

regards Philipp

Bronze

Re: No Ringback on IP phones when dialling ATA186's

In the ConnectMode field on the ATA type i.e "00060010". You can register the ATA s also as H.323 Clients.

Good Luck

Mehmet

93
Views
0
Helpful
2
Replies
CreatePlease to create content