Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

No Ringback on transfer from H323 Gateway

When Callers call in from a Did on a PRI through a VG200 H323 to the Unity Opening greeting and transfer to a phone, there is No Ringback. We are using VG200 IOS 12.2.3 , Unity 2.46, Call Manager 3.1(2C)<br>12.2.3 fixed this problem in 3.1 (needed to set ToSendH225UserInfoMsg to TRUE)<br>But now it doesn;t work again! Help!!!<br><br><br><br>

1 REPLY
Anonymous
N/A

Re: No Ringback on transfer from H323 Gateway

If you have tried Cisco's recommended fix for this (I seem to recall that it was both a CCM and IOS change), and it still doesn't work, I would suggest hitting the IP Telephony forum...(http://forums.cisco.com/eforum/servlet/NetProf?page=main)

We are pretty Unity product specific here.

Steve Olivier
Software Engineer
Cisco Systems

120
Views
0
Helpful
1
Replies