No Service on Agent Desktop and Supervisor Desktop
This issue was brought to our attention because the Supervisors logging into Supervisor Desktop are unable to see their agents in the team list.
The Agent Desktop window aswell as the Supervisor Desktop show "No service" at the bottom, this is the same for all agents and supervisors on the contact centres for this particular IPCC Express cluster.
But calls are still routing through fine, the only actual issue seems to be supervisors not being able to monitor their agents.
All services are up and the servers appear to be operating normally.
Re: No Service on Agent Desktop and Supervisor Desktop
The issue we were experiencing was with CAD, we were showing 'partial service' and with CDS
, we were showing 'no service' and could not see any team members. CDS and CAD 8.5
Brett Hanson wrote: I wonder if this issue could be resolved by restarting the "Cisco Desktop Call/Chat Service" service under UCCX Serviceability?
Restarting this service did resolve both issues. It did show 'In Service' status at the time of restart. Not sure if it affected current or incoming calls during restart as we did it off hours. Thanks Brett.
ll.... I restarted the "Cisco Desktop Call/Chat Service" service in CCX Serviceability > Tools > Control Center - Network Services.
The service was only restarted on the Publisher (we have pub + subscriber in HAoWAN config).
Once the service had restarted - the publisher remained 'master' of the service. I didn't bother to restart the sub's service at any stage.
The service restart took about 1 literal minute total - from clicking 'restart' to cycle back to IN SERVICE.
As part of the process, I had called into one of our contact center numbers and had an SDA take my call.
I restarted the service while on the phone to them - they didn't get booted from CAD and the call didn't drop.
Also of note - another call was made into the system during the service restart and another SDA on shift was able to take the call with no signs of impact.
CAD/CSD chat and also the team views in CSD started working again...issue solved. In turn, agents and supervisors logged out of CAD/CSD, closed the app, then re-opened it just in case (although I honestly don't think this was necessary).
I have yet to find anything online that says specifically what this service does (or any of the services in Network Services) in parts and as a whole.
I can only say that it is important in allowing Chat (clearly) and for Supervisor Desktop to be able to function at all really.
We didn't seem to experience any outage of any kind - so I will assume that the consequences of service restart in this instance were little to none.
I couldn't say what the consequences would've been had the service failed to restart again - forcing a system bounce (yuck).
Anyway - issue solved, hope this info proves useful to someone else!
PS. If you're new to the whole UCCX business, CSD = "Cisco Supervisor Desktop" and CAD = "Cisco Agent Desktop".
Also some additional interesting info per David King:
"...here is the link to the CAD install guide that I quoted regarding what the call/chat service does. It also explains the other Desktop services as well. The service descriptions start on page 11.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4