No Slot 0 when adding 2651XM-V MGCP Gateway in CCM 3.3.3

[allan.thomas]

When you specify 26xx from the list of gateways under CCM 3.3.3, there is no slot 0 available in order to configure an AIM-30 module. Slot 1 is the only slot listed which is specifically for NM-HDV, and NM-HDA modules.

Has anyone else come across this problem ? I would appreciate if anyone running 3.3.2 could possibly try and add a 26xx gateway and let me know whether slot 0 is available to configure ? This would prove whether the upgrade form 3.3.2 to 3.3.3.

m unable to verify whether this was still the ca

[amritpatek]

There is a similar know bug CSCeb23199 on www.cisco.com in which, for the 3700 series gateway the slot0 is missing . Please check for more details on the Bug Tool Kit. This can be resolved by using one of the patches available in Software Center.

[VINH DOAN]

There is no way to add a 2651XM as MGCP in 3.3.2 or 3.3.3. I tried it but there is no slot 0, only slot 1. You may try the 269X or using a H.323 gateway instead.

[Erik Peterson]

I just tried it on my 3.3(3) sr2 box, I can select 26xx, with Slot 0 available, specifically with an AIM-30 listed.

[JASON NIELSEN]

I am also running the same version of CallManager above and it works for me.