12-30-2005 01:52 PM - edited 03-15-2019 03:58 AM
The Application log in the EV of my CCM4.1 is getting full of this error. There are some thingsI checked regarding transcoding but I want to know specifically what processes make use of the MTP resources so that I could better troubleshoot this issue.
Solved! Go to Solution.
12-30-2005 05:57 PM
I have seen this many times when MoH is invoked and the Region config between the MoH server and the device being held uses G.729. The MoH server uses G.711 on;y by default. If G.729 has not been enabled in the IP Voice Media Streaming App service parameters then a Transcoder will be invoked when MoH is streaming to a G.729 Region.
If this is the case then the problem can be solved by making a Transcoder availble or by enabling MoH to stream G.729.
Kevin
12-30-2005 05:26 PM
If H323 GW is using MTP enable flag we will invoke a MTP or XCODER which acts as an MTP.
If codec missmatch either between endpoints, GW, when using SW CFB, etc a XCODER will be used also.
You may check CCM detailed trace match EV error and see when that device was needed and the insert process failed.
You may post the ccmtrace or open a TAC case.
Happy new year!
HTH
Gonz
12-30-2005 05:57 PM
I have seen this many times when MoH is invoked and the Region config between the MoH server and the device being held uses G.729. The MoH server uses G.711 on;y by default. If G.729 has not been enabled in the IP Voice Media Streaming App service parameters then a Transcoder will be invoked when MoH is streaming to a G.729 Region.
If this is the case then the problem can be solved by making a Transcoder availble or by enabling MoH to stream G.729.
Kevin
01-02-2006 07:21 AM
Wao!!!!
This is it, thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide