Hi,<br> <br> I am suffering a problem which is that a subscriber with appropriate COS sometimes cannot view other subscriber information at SA. The error message is as below<br>"<br>Access denied<br>You cannot access the Unity System Administration web pages.<br>There are too many active sessions. Please try again later.<br>Please see your system administrator for more details. <br>"<br><br>When I try again later, the subscriber can view other subscribers information at SA! May I ask what is the maximum number of active sessions according to the error message? Or how can I clear all active sessions? Or how can I minimize this situation?<br><br>many thanks<br>David<br><br>
There are only 5 sessions allowed at any one time, sounds like you guys are bumping up against that limit. If folks don't hit the "logoff" link when exiting the SA the session will remain open for the maximum duration configured in IIS (20 minutes by default). Sessions can also get "burned" entire and never release if users bail out of the SA by just closing the IE screen (although we've tightened this down as much as possible). There's no way to manually clear these sessions without bouncing the WWW service to do it.
You can adjust the number of AA sessions allowed using the Advanced Settings Tool which you can download off AnswerMonkey or ships on the Unity CD. In 3.1(3) and later this is in the Tools Depot. We don't recommend adjusting this up too much since you can increase the load on the Unity server if you have too many folks hitting the AA pages at the same time. Since IIS cannot be "throttled" it'll chew up as much CPU as it needs and can hinder Unity's ability to process real time call info. Make sure you have the horsepower necessary to handle the higher concurrent usage.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...