One Way Audio After Transferring out of a G729 Unity (Over Mgcp)
We have a Call Manager 3.12c with a Unity 2.46 Running G729 Codec. The problem is this.
Our Default Region Princeton is G711
Our Offsite region is a Vg200 with FXs Ports Running MGCP"Brunswick" is G711
Our Unity is its own Region and it is G729
When Brunswick calls through the Fxs ports to princeton , there is perfect two way audio. IF the call rings no answer to Unity, and then you dial "0" for the operator, or anouther extension, You can hear the Target Extensions Voice, BUT they cannot hear you.
I tried to set up a Voice Class Codec like an H323 Gateway, but I couldn't find anything like that on MGCP. (If that is even the problem)
Re: One Way Audio After Transferring out of a G729 Unity (Over M
Often times complex troubleshooting issues are best addressed in an interactive trouble-shooting session with one of our trained technical assistance engineers. While other forum users may be able to help, its often difficult to do so for this type of issue.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.