Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

one way audio from transfered call

i have a remote site(SRST)2821 connected to my main callmanager , i can call all the extensions internally without any problem, but when i transfred an incomming call from from my pri gateways to any of the remote extensions, they can't here anything but the caller has the voice (oneway situation)

any help would be appreciated

3 REPLIES
Blue

Re: one way audio from transfered call

there are a few reasons that one way audio can be created.

for starters, please see the following link for 'one-way-audio' troubleshooting:

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a008009484b.shtml

New Member

Re: one way audio from transfered call

thanks for reply

i check everything in troubleshooting

but the problem is when i call remote extensions i have no problem and also when i transfer calls that came from my analog gateway (FXO) still no problem, problem happend when i transfer calls that came to my PRI Lines , and my pri gateway configuration, like CSS and ... is the same as my analog gateway.

New Member

Re: one way audio from transfered call

one more thing my pri lines are comming from

a cat 6509 switch with x6608 blade that has catos,how can i check "ip routing" command on catos?

132
Views
0
Helpful
3
Replies