cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
282
Views
0
Helpful
2
Replies

one-way voice conversation

jwang
Level 1
Level 1

We are using HDV card on 3662 to connect to a channel bank and then telco in Iran. the problem now is we can hear Iran side very well buy they can not hear us. however, another company is using a 5300 to connect to the same channel bank and their calls are going well. we have tried verifying input gain and output attenuation, but it didn't help. On our FXO ports on the same router, the calls are good.

2 Replies 2

dumartin
Level 1
Level 1

Try this link.

http://www.cisco.com/warp/public/788/AVVID/fix_1way_voice.html

Without looking more in depth I cant make a suggestion. But the link may help you.

patrickv
Level 1
Level 1

One nasty thing that can result in one way voice is that ip routing should be enabled. This sounds very obvious, but make sure that command "ip routing" is in your running config. We had the same problem

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: