Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

OS Disk2 on CD

Folks,

We have an IBM server which is approved by cisco for callmanager installation. Unfortunately it does not have a DVD drive, my question was that can i request for OS Disk2 on a CD or may be burn the DVD cotent onto a CD?

Thanks,

Tarun

3 REPLIES
Blue

Re: OS Disk2 on CD

i haven't personally tried to burn the DVD to CD although i would hope the diskspace requirement would not be larger than CD.

better yet, you can order CD versions of the disks from Cisco if you have software maintenance. (if you dont have maintenance and the disks are new, you may be able to talk cisco into providing a CD version without additional cost)

if all else fails, get a DVD drive from IBM for that server type.

Green

Re: OS Disk2 on CD

Hi Tarun,

Actually DVD2 contains the following:

2000_2_7 in root 0 bytes

and folder Images

Contains the proper image for the IBM server.

and

TRACE.PQI

z.pqi

So when u burn it keep in mind that order.

HTH

//G

Cisco Employee

Re: OS Disk2 on CD

If you do not have DVD drive on your server then you have the WRONG OS for that server, the image will not matvh the hardware. FOr all servers that do not have DVD drive you should order a 2000.2.4 CD set & upgrade to the required higher release as dictated by the CCM version.

Mike

109
Views
5
Helpful
3
Replies
CreatePlease login to create content