We're trying to set up a shared line and use the overlay option on our 7940's with several extensions tied to button 1. Unfortunately while this works great on one of the phones on the other 3 it seems to go through fine when hitting change in CCME but when we actually check there is no overlay, just a regular line. I thought it was a firmware issue at first but now they are all set to the same firmware version as the phone that doesn't drop the overlay and the config still won't stick on the others.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...