10-15-2006 01:09 AM - edited 03-13-2019 03:24 PM
Dear Expert:
I am running CME 3.2 with 7940 IP Phone and I had been try to configure 'secondary call coverage' with button overlay feature, I use 2nd button of IP Phone 7940 for two other extensions, however when incoming call to second overlay number in the 2nd button, I still seeing the calling number as the first overlay number, for example, I have a incoming call to extension 1003, when I look at extension 1002 (with overlay 2nd button 2o1001,1003), the number appear is 1001 instead 1003. (wrong calling ID)
Any clue?
Here is my config:
ephone-dn 1 dual-line
number 1001
name Test 1
call-forward busy 7777
call-forward noan 7777 timeout 60
ephone-dn 2 dual-line
number 1002
name Test 2
call-forward busy 7777
call-forward noan 7777 timeout 60
ephone-dn 2 dual-line
number 1003
name Test 3
call-forward busy 7777
call-forward noan 7777 timeout 60
ephone 1
username "Test 1"
paging-dn 188
type 7940
keep-conference endcall
button 1:1 2o2,3
ephone 2
username "Test 2"
paging-dn 188
type 7940
keep-conference endcall
button 1:2 2o1,3
ephone 3
username "Test 3"
paging-dn 188
type 7940
keep-conference endcall
button 1:3 2o1,2
Thanks
SH
10-15-2006 12:31 PM
Take a look at this doc:
http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme33/cme33sa/cme33fea.htm#wp2282250
section:
Configuring for the Display of Called Names for Overlaid Ephone-dns
Chris
10-15-2006 08:43 PM
Thanks, Chris
This info really helps.
SH
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: