Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

PagePac with Call Manager

I'm trying to get a PagePac D300 interfaced to CallManager. I have tried FXO and FXS ports on both MGCP and H323 gateways with no success so far.

I've got the PagePac set to Loopstart. What I tried so far is:

FXS:

Setting the FXS port with extension, but it just rings and the PagePac never pics up. You can hear the ringing on the PagePac device.

FXO:

Using MGCP, I set up a routing pattern for the paging number and routed it to the particular interface via MGCP. no adjustments on the gateway were made

Using H323, I set the dial-peer as such:

dial-peer voice 10 pots

incoming called-number 1100

direct-inward-dial

port 2/0/8

forward-digits 0

Anyone have any ideas?

Thanks.

John

Here is a link to the PagePac manual:

http://support.avaya.com/edoc/docs/paging/ppampin1.pdf

1 REPLY
Community Member

Re: PagePac with Call Manager

I think the PagePac uses a E&M port.Try E&M port to connect PagePac

311
Views
0
Helpful
1
Replies
CreatePlease to create content