You could setup a phone in a common area, crank the speaker volume up. Setup PLAR (ring down) to this phone and have it autoanswer on speaker phone. Basically you can then just call that extension (shared many extensions) and have it auto answer, announce the page and hang up. You can lock this down by CSS and PTs so only certain people have access to do this.
We have used their Australian arm to integrate paging into our CCM environment.
We configure an ATA with a DN, say 300 and whenever anyone wants to use the paging system they dial 300, the paging system plays an 'attention' tone and now they can page, they simply hang up when done paging.
The 1st analogue phone port on the ATA plugs into their 'PagePac' box, which when it receives ringing voltage from the ATA it weaves it's magic... (sorry I'm not familiar with the way in which the PagePac box works, only that it does.)
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...