Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Parking a call from an analog SCCP controlled FXS port

I have an analog phone connected to an FXS port which is being controlled by SCCP. I need the ability to park a call and then pick up that call from an IP phone. I have found documentation about using Call Manager Express on the gateway to park calls from analog phones, but this does not register with the Call manager cluster so IP Phones can pick it up.

TAC says this is not a feature that is supported but I am looking for what kind of work around there may be. I am unable to get IP Phones to all of our phone locations but need to be able to park a call.

Using SCCP and MGCP I am able to transfer using the flash hook on the analog phone, but I am unable to transfer to the Call Park extension.

1 REPLY
Bronze

Re: Parking a call from an analog SCCP controlled FXS port

The park location gets displayed on the phone. Analog phones dont have displays. So calls can be picked up that have been parked from a7940 or 60. it is not possible to park a call from an analog phone, but if you got a call already parked you can pick it up from the analog phone.

151
Views
0
Helpful
1
Replies