I have a client that is a SP and wants to use their Call Manager and Unity as a foundation for serving VoIP/Unified Comms to their clients. Can the Cisco Unity/CM be used that way? Can it be partitioned? They do not have a softswitch but are using a DMS10.
i know of several deployments on which a single CUCM server works for 2 or more companies (end users are actually unaware of this fact) and it can be done, the main issue here is the scalability and the complexity of the dial plan that it requires.
you will need to use partitions and CSS to accomplish this in a way that users from company A cannot reach users from company B.
if they overlap extensions and use the same GW this would also cause trouble, there are several things you need to watch out on the dial plan but it can be done
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...