Passing originator digits from VoIP

[dguevara]

Hi,

I install a VoIP environment with an AS5300 to a PSTN switch and a 2610 to CPE with two FXS (between them there is an Internet cloud). I need to pass all digits from originator to destiny, but also I need to pass originator digits (like inserting digits of the number of the FXS port that generated the call) for Billing. I need to know who generate the call and where it is calling to. The billing part will be part of the switch set.

Could you please help me with that?, is it possible to perform this feature?

Thanks

[ciscomoderator]

Hi Daniel,

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.