i have a Router connected to PBX via 4 FXO card and have on the other side a call manager v4 with 4 Ip phones.
The problem is that my router doesn't support ccm-manager command (maybe wrong IOS) so i was unable to setup mgcp properly, i tried to configure it as h323 gateway but i didn't find a way on how to translate the calls from analogue to IP and vise-versa.
my analogue extentions are 31 32 33 34 and my ip phones are 1050 1051 1052 1053.
do you know what i need to do to make this router translate properly and what modification i need to make on the call manager
I'm new in IP telephony and your help will be great
Since the ports are FXO, it doesn't support called digits. Hence you cannot route calls to any IP Phone. You would need to send all calls that hit the FXO to either an IP Phone (operator) or an Auto Attendant and then route calls from there.
1. On the router FXO ports, add connection plar statements to send calls to an IP Phone, say 1050
First thanks a lot for your detailed explanation, but there is one thing that confuse so i want it to be clear in my head before i implement it.
here is the mapping that i want :
31 (analogue phone) --> 1050 ip phone
what i want to say is : when a guy from the analogue system call extention 31 the call will hit the PBX then the FXO, when it arrive to the FXO what will happen next ? it will be forewarded as it is to the ip phone 1050 ?
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...