Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

PBX Connection to Unity

If anyone knows what a typical pbx system "sees" a link to Unity as, I would be grateful for an answer. I believe it is either a trunk, or a control line and a rs-232 link.

Thanks

1 REPLY
Community Member

Re: PBX Connection to Unity

The way you connect the PBX to Unity is dependent on the type of PBX.

Unity supports some Dialogic analog cards and one T1 card.

To see the supported voice card in Unity 3.1, check the link -

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps2237/prod_pre_installation_guide09186a008010a339.html#1287486

To get information on the PBX's supported by Unity and the integration type and components, check -

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps2237/prod_pre_installation_guide09186a008010a339.html#1287610

For more details about a specific integration, check the configuration guide books that are available at -

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps2237/ps2238/index.html

- Anil

177
Views
0
Helpful
1
Replies
CreatePlease to create content