Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PerfLib "DNS" Errors on system running Unity

Hi,

I just reviewed my event log on my unity system and am seeing a huge number of perflib errors and they seem to be related to DNS. What could be the issue here and how could I clean these up. Thanks

5 REPLIES
Cisco Employee

Re: PerfLib "DNS" Errors on system running Unity

can you actually post the full content of one of these errors for us to look at?

New Member

Re: PerfLib "DNS" Errors on system running Unity

Here are the messages relating to this problem. Thanks for the help!!!

Registration of the DNS record '_gc._tcp.Default-First-Site-Name._sites.acsip.on.ca. 600 IN SRV 0 100 3268 ICS-436af0a2f7e.acsip.on.ca.' failed with the following error:

DNS operation refused.

The Open Procedure for service "DNS" in DLL "C:\W2KS\System32\dnsperf.dll" failed. Performance data for this service will not be available. Status code returned is data DWORD 0.

These were two different messages, both errors, and I thought that they may be related. Thanks again

Cisco Employee

Re: PerfLib "DNS" Errors on system running Unity

actually, I was gunning for the full event log entry information - the easiest way to do this is to use the "copy" button on the event log viewer which will include the event source, event Id and all that good stuff as well as the text of the error itself - this way we can look things up in online databases - makes it easier to find possible solutions that way.

New Member

Re: PerfLib "DNS" Errors on system running Unity

Hello again,

Here are the actual events, as copied from Event Viewer. Thanks again.

Event Type: Error

Event Source: Perflib

Event Category: None

Event ID: 1008

Date: 5/2/2003

Time: 10:59:46 AM

User: N/A

Computer: ICS-436AF0A2F7E

Description:

The Open Procedure for service "DNS" in DLL "C:\W2KS\System32\dnsperf.dll" failed. Performance data for this service will not be available. Status code returned is data DWORD 0.

Data:

0000: 02 00 00 00 ....

-------------------------------------------------------------------------------------------------------

Event Type: Error

Event Source: Perflib

Event Category: None

Event ID: 1010

Date: 5/2/2003

Time: 11:00:06 AM

User: N/A

Computer: ICS-436AF0A2F7E

Description:

The Collect Procedure for the "PSched" service in DLL "C:\W2KS\System32\pschdprf.dll" generated an exception or returned an invalid status. Performance data returned by counter DLL will be not be returned in Perf Data Block. Exception or status code returned is data DWORD 0.

Data:

0000: 3d 01 00 00 =...

----------------------------------------------------------------------------------------------------

Event Type: Error

Event Source: NETLOGON

Event Category: None

Event ID: 5774

Date: 5/2/2003

Time: 10:19:48 AM

User: N/A

Computer: ICS-436AF0A2F7E

Description:

Registration of the DNS record '_kpasswd._tcp.acsip.on.ca. 600 IN SRV 0 100 464 ICS-436af0a2f7e.acsip.on.ca.' failed with the following error:

DNS operation refused.

Data:

0000: 2d 23 00 00 -#..

------------------------------------------------------------------------------------------------

Thanks again.

New Member

Re: PerfLib "DNS" Errors on system running Unity

Hi !

You're first error message is associated with the fact .. that the DNS Server configure for the Network Interface on the server is not configure to "Allow Dynamic Update

Ensure that :

- The DNS Parameter for the NIC is set to blank (this will set the DNS to : 127.0.0.1), or the local IP Address of the UNITY .

- Ensure that the DNS Service is started on UNITY

The Second one .. if a reference bug on MS Knowledge Base

Look for :

Microsoft Knowledge Base Article - 304541

System Monitor Is Missing in the DNS Counters and Event ID 3009 Is Logged

Hope this will help !

MARTIN

218
Views
0
Helpful
5
Replies