If you want to integrate Personal Assistant with Cisco Unity 2.4.6 or higher or Microsoft Exchange 5.5 or higher, you must have those applications installed on your network on systems separate from Personal Assistant. If you are using Windows 2000 domains on your network, you must install Personal Assistant in the same domain as the Exchange server, or in a domain trusted by its domain.
If you are integrating Personal Assistant with Cisco Unity or Microsoft Exchange in a Windows 2000 domain, you cannot use the same product code to install both Windows 2000 and Personal Assistant. You must first install Windows 2000, restart the system, and join the domain before proceeding with the Personal Assistant installation.
If you are installing multiple Personal Assistant servers, you must install them in the same Windows 2000 domain.
To install Personal Assistant on an Windows 2000 Domain, select Use a Domain Account on the Cisco Personal Assistant Components window and enter the following:
AccountDomain administrator account.
PasswordPassword for the domain administrator account.
DomainDomain in which you are installing Cisco Personal Assistant.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...