Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PGW link is OOS. layer1 is up, layer 2 comes in service

I am attempting to use cisco 5350xm and the PGW to send a video call via a tdm switch

To that extent, I am trying to build an F-Link between the PGW and the tdm gateway

The e1 is up and running

===

This is from the cisco 5350xm

1#show controller e1 3/0
E1 3/0 is up.
  Applique type is Channelized E1 - balanced
  Description: link to NJY PT CODE 0.125.6 (MVT Testing)
  No alarms detected.
  alarm-trigger is not set
  Version info of slot 3:  HW: 519, PLD Rev: 7
  Framer Version: 0x9

Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x05,
Board Hardware Version 2.7, Item Number 73-5267-03,
Board Revision A1, Serial Number JAE1211BEV2,
PLD/ISP Version 3.0,  Manufacture Date 16-Mar-2008.

  Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.
  Data in current interval (541 seconds elapsed):
.......
  Total Data (last 4 15 minute intervals):
     2592 Line Code Violations, 84 Path Code Violations,
     0 Slip Secs, 2 Fr Loss Secs, 8 Line Err Secs, 0 Degraded Mins,
     6 Errored Secs, 0 Bursty Err Secs, 4 Severely Err Secs, 0 Unavail Secs

=======

This is from the PGW

PGWLAB mml> rtrv-c7lnk:c7lnk-njy-mvt:

   MGC-01 - Media Gateway Controller 2010-01-29 16:57:09.360 EST
M  RTRV
   "c7lnk-njy-mvt:lnk-njy-mvt,LID=0:OOS"
   /* Link 1 via */

PGWLAB mml> rtrv-iplnk:iplk-njy-mvt

   MGC-01 - Media Gateway Controller 2010-01-29 17:00:09.741 EST
M  RTRV
   "iplk-njy-mvt:IS"


======================

This is from the cisco 5350xm

1#debug ss7 sm timer
*Nov 20 23:18:58.830: SESSION SET STATE-ACTIVE   Active session = 0
*Nov 20 23:18:58.830: Session[0]: SM SESSION STATE-ACTIVE
*Nov 20 23:18:58.830: Session[1]: SM SESSION STATE-OPENING
*Nov 20 23:18:58.830: Session[2]: SM SESSION STATE-OOS
*Nov 20 23:18:58.830: Session[3]: SM SESSION STATE-OOS
*Nov 20 23:18:58.830: Session[4]: SM SESSION STATE-OOS
...

=================

This is from the platform log of the PGW

PROT_ERR_MTP3_LNK_CNTL: Link c7lnk-njy-mvt[001d0005] change of state to Out-of-service, cause Link fail
PROT_ERR_MTP3_PC_CNTL: Point code ss7srv-njy-mvt[00150005] change of state to Out-of-service, cause No Route Available
PROT_ERR_MTP3_PC_CNTL: Point code ss7srv-njy-mvt[00150005] change of state to Out-of-service, cause No Route Available
PROT_ERR_MTP3_PC_CNTL: Point code ss7srv-njy-mvt[00150005] change of state to Out-of-service, cause No Route Available
PROT_ERR_MTP3_PC_CNTL: Point code ss7srv-njy-mvt[00150005] change of state to Out-of-service, cause No Route Available
PROT_ERR_MTP3_LNK_CNTL: Link c7lnk-njy-mvt[001d0005] change of state to Out-of-service, cause Link fail
PROT_ERR_MTP3_LNK_CNTL: Link c7lnk-njy-mvt[001d0005] change of state to Out-of-service, cause Link fail
PROT_ERR_MTP3_PC_CNTL: Point code ss7srv-njy-mvt[00150005] change of state to Out-of-service, cause No Route Available

please help..let me know what information I need to provide.

I hnow the info I provided is haphazard

thank you

Everyone's tags (1)
552
Views
0
Helpful
0
Replies