Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Phone outside building

We have just placed a telephone outside our security shanty for people to call security if no one is present. We want the phone to dial one extension when the handset is offhook. No other calling capabilities can exist. How would I go about configuring this? I believe it to be a necessity to create a new CSS for security, and assign that CSS to the external telephone, but I am not certain. Any advice and pointers would be most appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Phone outside building

Hi William,

Here is a good config guide that shows the step by step to setting Hotdial up;

Hotdial on IP Phones with CallManager Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080232b9f.shtml#intro

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: Phone outside building

Hi William,

Here is a good config guide that shows the step by step to setting Hotdial up;

Hotdial on IP Phones with CallManager Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080232b9f.shtml#intro

Hope this helps!

Rob

New Member

Re: Phone outside building

Many, many thanks Rob. That should do the trick for me.

Hall of Fame Super Red

Re: Phone outside building

Hi William,

You are most welcome :)

Rob

222
Views
0
Helpful
3
Replies
CreatePlease to create content