I have two call managers running Call Manager 3.2. The publisher is running using up 889Mb of it's 1Gb RAM and is logging threshold events into CiscoWorks regarding using up 87% of the avail physical memory. The subscriber is using only 250Mb of it's 1GB of physical memory. Is this low physical mem problem a cause for concern on the publisher?
Then you probably see dllhost.exe taking about 300-400mb of memory. TAC recommended to add more physical memory or reset IIS once you see the critical amounnt of memory (over 95%) being used as a workaround
I checked and DLLHOST was using up a ton of memory. I did a stop and restart of IIS and I got back about 200Mb of the 300 it originally nabbed. After an install of os pack 2.3spI there was no change. Also, we are at 3.2.2c. If the MLA is installed and this is expected behavior, what happens when all the memory is gone, or does it eventually stop pulling more memory?
IntroductionCUCM Routing RulesDial String implementation PolicyCUCM Routing LogicSIP URI Call Routing Analysis+++ Case Study: 1 ++++++ Case Study: 2 +++Conclusion
Over the last few months, I have had the privilege of working on SI...
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...