Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

pick up in the hunt group

There are three members 2008/2009/2010 in a hunt group with the pilot number 8100,can I configure the three nubmers in a pick up group ?for example ,when user dials 8100,the 2008 with the high priority rings ,can I use 2009 to pick up the call ?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: pick up in the hunt group

Hi,

Pick-Up from a hunt-pilot is unsupported, but it is implementet. At my customer side we need this feature and it work perfect. BUT NO TAC Support when somethink didn´t work!!!!

You must open a TAC Case and asked to this feature.You must update your CCM to 4.1.3SR2

Please look to the BUG:CSCsb42763.

Perhaps you need your local account team to get this feature.

11 REPLIES
Hall of Fame Super Silver

Re: pick up in the hunt group

Pick up groups are not supported with Hunt groups.

Chris

New Member

Re: pick up in the hunt group

This is one of those features I think should be easy to implement, but must not be. What's so hard about allowing someone to pickup a call that is ringing into a hunt group? If someone needs Call Pickup, this problems forces them to use shared lines in cases where hunt groups would make more sense. Doesn't it?

Hall of Fame Super Silver

Re: pick up in the hunt group

You can assign the Pickup Group to the Line Group member phones, and when a call comes in to the hunt pilot and hunts one of the members that belongs to pickup group, you will be able to pickup the call. I just tested it.

Chris

New Member

Re: pick up in the hunt group

hi,cderen

I just had a test,but still failed.I called the 8100 ,and the 2008 rang,I used 2009 to pick up ,nothing happened.What is your version of callmanager?Mine is 4.1(3)sr1.

New Member

Re: pick up in the hunt group

hi,neibergeri

In my case ,the hunt group member 2008 must have the highest priority and answer most of the calls to the group,if we use the share line,all the other numbers in the group ring at the same time,it is boring ,right ?

New Member

Re: pick up in the hunt group

Hi,

Pick-Up from a hunt-pilot is unsupported, but it is implementet. At my customer side we need this feature and it work perfect. BUT NO TAC Support when somethink didn´t work!!!!

You must open a TAC Case and asked to this feature.You must update your CCM to 4.1.3SR2

Please look to the BUG:CSCsb42763.

Perhaps you need your local account team to get this feature.

New Member

Re: pick up in the hunt group

Thanks. I checked the release notes of callmanager 4.1(3)sr2, The bug :CSCsb42763( Call Pickup fails on Hunt List ) is in the resolved list. I think the issue will be fixed when I upgrade callmanager to sr2.

New Member

Re: pick up in the hunt group

Has anybody managed to get this working yet?

I have upgraded to Call Manager 4.1(3)SR2 and it still does not work. I have also tried using the old work around of pointing it to a CTI port (in the same Pickup group) with a CfwdAll to the Hunt Pilot. This does not work either.

I would be very interested to hear if anybody else is having the same issue.

Silver

Re: pick up in the hunt group

Yes. Here you go..

1. Enter CSCsb42763 (in mixed case) in the Enterprise Parameter 'Cisco Support Use 1'

under the new group 'Cisco Support use Only' and click update. Only the value CSCsb42763 in this parameter can enable the configuration in step 2.

(note: Change the value to anything else to disable this functionality.)

2. Go to Hunt Pilot Configuration page and select a call pickup group from the Call Pickup Group dropdown list and click update.

New Member

Re: pick up in the hunt group

Hi, has anyone tried marinaibm's solution?

I have never used the "Cisco Support Use Only" parameters before and I have no lab/test Call Manager to experiment with. I don't want to try this in a "live" system.

Thanks

olamob

New Member

Re: pick up in the hunt group

Works perfectly. Tried it in the lab last week and will implement on a live system next week.

363
Views
5
Helpful
11
Replies
CreatePlease login to create content