Pilot points not Forwarding Pilot DN to Unity VM on 3.1(2A)
How do you get a pilot point to forward its own Dn info to Voicemail? for example if you dial a pilot point "0" and the first line in the hunt group is 5001. how do I get the Call manager to send "0" as the Forward no answer DN when it forwards to Unity
Re: Pilot points not Forwarding Pilot DN to Unity VM on 3.1(2A)
No, that is an external mask only (for outbound caller-id to the PSTN). Go to the Route Plan Menu and select Translation Pattern. Add a translation pattern for 5001 (set the partition and calling search space if applicable). Then in the calling party transform mask enter 0. If this does not work out you can also setup a rule in Unity. You would just make a new rule in the Call Routing menu that tells it what call handler to go to when it receives a call from 5001.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4