Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Plar problem with SRST IOS

I discovered a problem with IOS 12.1(5)YD2. Incoming calls on my T1 PRI will not forward to the destination specified on my Plar statement on the T1 Voice-Port. I tried IOS 12.1(5)XM4 with the same configuration and it works with no problems. I also tested incoming calls on the POTS lines with IOS 12.1(5)YD2 and this worked curreclty with my plar statement on the FXO voice-port. Is there another way to forward all incoming calls from my T1 PRI to a specific extension?

-Ken

3 REPLIES
New Member

Re: Plar problem with SRST IOS

I don't believe that PRI is supported is SRST yet, not until YD3.

New Member

Re: Plar problem with SRST IOS

I was informed the specific function of SRST wasn't supported but the IOS should still work and allow me to use my POTS lines for the SRST option.

New Member

Re: Plar problem with SRST IOS

any idea when yd3 is going to be available?

132
Views
0
Helpful
3
Replies
CreatePlease to create content