We're trying to implement an enterprise QoS policy and I'm wondering how we can apply our QoS policy maps to several different sub-interfaces on a port-channel. In our case, we have both LAN and WAN connections that connect as VLANs on a switch and terminate as sub-interfaces on a port-channel that combines two Gigabit Ethernet interfaces on our router. The LAN connection will need to have a ingress service-policy to classify traffic as it comes from a customer LAN, and the WAN connections will have to have an egress service-policy to place the traffic classes into LLQ and CBWFQ queues as it leaves the router. Could I put both the ingress and egress service-policies on the physical router interface, or should I put them on the port-channel interface? Or should I apply them to the individual sub-interfaces? For example, I could put the ingress classification service-policy on the LAN sub-interface connection.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.