Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

port configuration

I just got a unity 4.0 box. When I went to the port configuration page, there wasn't any ports listed nor was there a there a way I could see to add a port. My license page says I have 2 ports. How do I "see" and configure these ports?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: port configuration

In Unity 4.0 ports are added and configured using the Unity Telephony Integration Manager (UTIM).

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/inst/inst402/ex/ig_020.htm#1508354

If you're already there and still have troubles we'll need more details to know what might be wrong.

-Eric

1 REPLY
Cisco Employee

Re: port configuration

In Unity 4.0 ports are added and configured using the Unity Telephony Integration Manager (UTIM).

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/inst/inst402/ex/ig_020.htm#1508354

If you're already there and still have troubles we'll need more details to know what might be wrong.

-Eric

89
Views
0
Helpful
1
Replies
CreatePlease to create content