Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Port Security - IP Phone and PC different VLANs

Hi,

we are using IP Phones and PCs attached.

Pwr-Switch is a 3524PWR-XL.

We want to use Port Security or VSPM to secure our ports.

Is this working?

Any experience in this issue?

regards

August

1 REPLY
Silver

Re: Port Security - IP Phone and PC different VLANs

You can use the port security in this case.

The only conditions are :

1)If you enable port security on a voice VLAN port and if there is a PC connected to the IP phone, you should set the maximum allowed secure addresses on the port to more than 1.

2)You cannot configure static secure MAC addresses in the voice VLAN.

http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12112cea/3550scg/swtrafc.htm#86378

97
Views
0
Helpful
1
Replies
CreatePlease to create content