Can anyone tell me how i can change the port for voice over IP. If my packets are getting blocked by my ISP thru that port..i need another port to do the work. Instead of port 1720...say if i want to use port 1000(for example). I use this to communicate between my offices.
Change ISPs, or call them and tell them you are going to. They should not be restricting any traffic. Maybe rate limiting, but not restricting. In any case, you cant change the port. Does anyone know if proxy servers could support voice? If so, it would have to be located out on the Internet on the other side of your ISP.
Thats interesting. You should check with Cisco to see if they have a workaround for you. One that comes to mind might be building an encrypted tunnel using IPSEC and carrying your voice traffic over that. I wouldnt want to encourage you to skirt the law though.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...