I did speak to them and am trying to get them to quote one without success. However, the contact at i3 mentioned that they do not work over IP since CallManager does not report back call progress tones over IP. In MANY conversations with Cisco they recommend these vendors us JTAPI to create this as an application using Cisco trunks and I have yet to find a solution like this.
Another company who can offer this functionality are ARC Solutions, http://www.arcsolutions.com. It's not full "predictive" dialling but "power" dialling, worth some investigation though as their integration with CCM is very tight. We have partnered with them and found them to be very helpful.
I sent them a message and am waiting a reply. I have heard that these solutions are not working over IP since CallManager does not report back call progress over IP and we need to revert to tie lines. This is okay but nobody at Cisco can even confirm a tested solution or one in production at all.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...