cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
167
Views
0
Helpful
1
Replies

Priorization for STUN

I need give quality of service my STUN traffic , but , my config not function :

This is the configuration :

!

class-map match-all voip

match ip precedence 5

class-map match-any STUN

match protocol stun

class-map match-all datos

match access-group 1 //This is my local network

!

policy-map eds

class voip

priority 54

class datos

set ip precedence 3

class STUN

priority 20

set ip precedence 5

What is wrong ?

Regards

1 Reply 1

wong34539
Level 6
Level 6

Please check the stun configurations properly. The priority groups, priority lists and related stuff need to be verified.

The following document has the various commands and the example for configuring stun.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_r/qrfcmd6.htm#1036156

Hope this helps.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: