Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
Community Member

Private line emulation on uC500/CME does not generate CDR

Hi all, I have a customer who has the following configuration in his UC500 to simulate a private line.

router#show running-config

voice-port 1/0/0

connection plar-opx 6230001

dial-peer voice 82 pots

destination-pattern 82

port 1/0/0

ephone-dn 10

number 1010

name manager

ephone-dn 11

number 6230001

name private-line

trunk 82

ephone 1

button 1:10 2:11

This works as expected, when the manager selects line 2 he gets his private line can can place calls to the CO. the problem is that calls from this private number generate call detail records with no dialed number. I have replicated this in a lab with a cisco 1700 router running cme 4.1 and the effect is the same. When the radius call detail records are examined the dialed number is totally absent. I may be wrong, but I think this may be an oversight by Cisco, but I need confirmation and if so, some idea as to when there may be a fix.

A workaround solution may be to find another way to emulate private line operation on CME without using the "trunk xx" command. Any ideas how this may be accomplished?

Thank you.

CreatePlease to create content