Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problem applying QoS to an interface

Hi,

We have a couple new 6503-E's and we have been trying to apply QoS to a Gig interface and get the following response from the IOS.

"cannot add a filter requiring Nbar

while policy map is installed and HW. Remove the service policy from the

interface, add the filter and then attach the service policy to the interface."

Has anybody had this problem....seems like there would be an easy fix. My policy map and class map are created.

class-map match-any Priority-Data

match protocol dlsw

class-map match-any Interactive-Video

match protocol rtp video

class-map match-any Call-Signaling

match access-group 103

class-map match-any Voice

match protocol rtp audio

class-map match-any Scavenger

match protocol fasttrack

match protocol gnutella

match protocol napster

match ip dscp 2

match ip dscp 6

!

!

policy-map QoS-Model1

class Voice

priority percent 5

set dscp ef

class Interactive-Video

priority percent 1 660000

set dscp af41

class Call-Signaling

bandwidth percent 1

set dscp af31

class Priority-Data

bandwidth percent 1

random-detect

set dscp af21

class Scavenger

bandwidth percent 1

random-detect

set dscp 6

class class-default

bandwidth percent 91

fair-queue

Once I apply the service policy output to the interface it comes back with that error. Any help would be appreciated!

Thanks in advance!

1 REPLY
Blue

Re: Problem applying QoS to an interface

remove the NBAR relying statements:

match protocol fasttrack

match protocol gnutella

match protocol napster

put these in a separate filter and apply then apply your policy or remove altogether just to test.

this should be able to apply without the NBAR references.

185
Views
0
Helpful
1
Replies
CreatePlease login to create content