Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Problem Call From CCM to CME

We have integrate our Cisco Call Manager with a remote Cisco Call Manager Express.

The calls from CME to CCM have no problem at the contrary we can not make a call from CCM to CME.

The integration was made by an intercluster trunk no gatekeeper controlled on CCM, here attacched I put the CME configuration.

If I open the debug on CME I have these output when I make a call from CCM directed to CME.

Nov 1 01:24:28: //-1/xxxxxxxxxxxx/H323/cch323_ct_main: SOCK 0 Event 0x1

Nov 1 01:24:28: //-1/xxxxxxxxxxxx/CCAPI/cc_api_supported_data:

data_mode=0x10082

Nov 1 01:24:28: //-1/xxxxxxxxxxxx/H323/cch323_get_new_ccb: ccb (0x44E34A9C) is in use

Nov 1 01:24:43: //-1/xxxxxxxxxxxx/H323/cch323_timer_dispatch: Timer[CCH323_H225_CONNECTION_TIMER] expired

Nov 1 01:24:43: //-1/xxxxxxxxxxxx/H323/h323_gw_clean_send_blocked_watch: fd 2

Nov 1 01:24:43: //-1/xxxxxxxxxxxx/H323/h323_set_cc_cause_for_spi_err:

Categorized cause:38, category:186

Nov 1 01:24:43: //-1/xxxxxxxxxxxx/H323/h323_set_release_source_for_peer: ownCallId[-1], src[6]

Nov 1 01:24:43: //-1/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:

CALL_ERROR_INFORMATIONAL; Call Id Is Invalid=-1

Nov 1 01:24:43: //-1/xxxxxxxxxxxx/H323/cch323_cleanup_xport: IP_entry is NULL, returning

Thank you

2 REPLIES
Super Bronze

Re: Problem Call From CCM to CME

Hi Laura

Have you followed the steps required on the CallManager side as outlined in this document:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_chapter09186a008044751b.html#wp1045089

Hope this helps..

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Re: Problem Call From CCM to CME

I followed these step:

http://www.cisco.com/univercd/cc/td/doc/product/voice/its/cme33/cme33sa/cme33bsc.htm#wp1001000

It explain in detail how to integrate CCM and CME.

354
Views
0
Helpful
2
Replies
CreatePlease to create content