Problem of Session with the Gateway ( Redundant Gateway)
I have a Gateway AS5300 connected to 2 Catalyst ( Through a Hub) to have a redundancy .STP is enabled on both Catalyst .
When I do the test for the redundancy , everything is working well .What I say is that when we cut one connection to the AS5300 , the connection is broken between more or less 20 sec ( It is normal , it is the time that STP must converge ) .
So at the IP Level , I have well a redundancy BUT my Call-Manager doesn't see well the gateway . To correct this situation , I must reboot my gateway to force it to register again on the Call-Manager .
I think that this problem is linked with the Session of the Gateway with the Call Manager .
Re: Problem of Session with the Gateway ( Redundant Gateway)
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...