Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problem registering E1 gateway

I have WS-X6608, I have configured one E1 port with the IP address and tftp but it does not register with Call Manager. I have checked that the version in the blade is HP1: D00403010051 while in the Device Defaults in CCM is another. Can be this the problem?

I haven't found in the web the load D00403010051.

New Member

Re: Problem registering E1 gateway

With an sniffer I see the Read Request sent by the gateway but it shows: "maformed packet: TFTP" and then no answer from the Call Manager

New Member

Re: Problem registering E1 gateway

Sounds crazy but doublecheck the mac address you added to CallManager. No Spaces and no dashes. Can you Ping the Blade?

If you can not get it to work enter a static address and vlan and tftp into the 6608 . Reset the module card and try again.