Problem with communication between analog phones and IP Phone
I have a CCM 4.1.3 and a Cisco router 2821 as a voice gateway with an EVM-HD-8FXS/DID module which has an EM-HDA-6FXO card; My problem is that when I call the analog phone (8800) connected to the FXS port from an IP Phone (4745) the analog phone rings; but When I call the IP phone from the analog phone, the call doesn't go through.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...