Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

problem with COR configuration

Folks,

trying to follow cisco documentation on Class of restriction. Created a senario in which i connected 2 analog phones of 2 FXS ports on my router. One acting as PSTN (all NANP destination patterns pointing to it) and the other initiating the call from a 4 digit extention. I apply cor incoming list to this 4 digit number to only dial philadelphia, but, this extension can call all extensions (philadelphia, nj, and new york), what an i doing wrong? any assiatance would he appreciated.

voice-port 1/0/0

!

voice-port 1/0/1

!

!

mgcp profile default

dial-peer cor custom

name philadelphia

name newjersey

name newyork

!

!

dial-peer cor list philadelphia

member philadelphia

!

dial-peer cor list newjersey

member newjersey

!

dial-peer cor list newyork

member newyork

!

!

dial-peer voice 1 pots

corlist outgoing philadelphia

destination-pattern 215.......

port 1/0/0

!

dial-peer voice 2 pots

corlist outgoing newjersey

destination-pattern 609.......

port 1/0/0

!

dial-peer voice 3 pots

corlist outgoing newyork

destination-pattern 215.......

port 1/0/0

!

dial-peer voice 4 pots

destination-pattern 1000

port 1/0/1

!

dial-peer voice 5 pots

corlist incoming philadelphia

answer-address 1000

!

!

1 REPLY
Silver

Re: problem with COR configuration

Try this:

dial-peer voice 4 pots

destination-pattern 1000

corlist incoming philadelphia

port 1/0/1

Looks like the router is not able to associate the calling number 1000 with the corlist philadelphia.

91
Views
0
Helpful
1
Replies
CreatePlease to create content