We are trying to install and network 2 Unity VM servers,<br> one site (3.0.3) single domain - we want each server to<br> have it's own mailboxes.<br><br>Problems: when we try to install the 2nd Unity server,<br>Unity does not properly install. Some services don't<br>even show up, some AD users don't get created etc.<br><br>Does anybody know any issues with networking 2 Unity's<br>at the same site in the same domain?<br><br><br><br>
The first time we installed the 2nd Unity server we had some issues - so we tried ran the Unity uninstall utility and reinstalled Unity. That was a mess: - SQL was missing both ReportDB and UnityDB (it looks like they were not created because their .dll's were not deleted in the uninstall) - AvDSAD and AvDSGlobalCatalog services were missing - the "Unity_SERVERNAME" and "Esubscriber" users were not created
So, we tried to completely rebuild the 2nd Unity server. The installation fails when it tries to install Exchange on Unity2 because Unity1 still has Unity2 as a server in the Exchange Service Manager. It says to remove it but when you try it won't let you.
You shouldn't need to reinstall with a new server name. All of the Unity configuration information that is preventing you from installing is stored in AD. You might want to go though and delete the users and location in AD Users and Computers. Remember that you need to choose 'View --> Advanced Features' in AD Users and Computers to see the Unity OU. This tool might help a bit too: http://www.answermonkey.net/App_BunnyKiller.htm
If you're not sure what you need to remove you might want to open a case with TAC and have them help you clean out AD.
Keith Chambers Unity Technical Lead Unified Voice Team, San Jose Cisco Systems firstname.lastname@example.org
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...