Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Programming an auto-setup MeetMe speeddial

Does anyone know if a way to pre-program a softkey or speeddial to automate the process of setting up a MeetMe conf bridge for a specified DN? So far, I've tried associating the MeetMe pattern DN(s) with an IP phone, but not having any success so far. I'm using UCCM 6.1.

Any ideas would be greatly appreciated. Thx.

5 REPLIES
Cisco Employee

Re: Programming an auto-setup MeetMe speeddial

Unfortunately that's not possible, meet-me requires you to press the meet-me softkey and then dial the DN.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Programming an auto-setup MeetMe speeddial

Hi,

The above requirement of starting the MeetMe conference through an external phone(PSTN) along with authentication,limit of users per conference and scheduleing feature IS POSSIBLE through an application and we have done it.

New Member

Re: Programming an auto-setup MeetMe speeddial

Would love to know what application could do this and what I'd need to do to get it!

New Member

Programming an auto-setup MeetMe speeddial

Hisaikiapranjol, mind sharing what application you used to get this done.

New Member

Programming an auto-setup MeetMe speeddial

Hi Subash,

The above requirement was fulfilled by developing a custom application "MARS MeetMe Password" for our customers.

https://marketplace.cisco.com/catalog/products/1923

1975
Views
0
Helpful
5
Replies