PVDM

[gaoyang]

Does the PVDM-XX(192K) can be used in 1760

[robrhodes]

Supported PVDM part numbers for the 1760 are:

pvdm-256k-4,pvdm-256k-8,pvdm-256k-12,pvdm-256k-16HD and pvdm-256k-20HD

[gaoyang]

I use a PVDM-12 in 1760, and it works, but I don't know if I can use it without problem in any case:

Packet Voice DSP Module Slot 0:

Hardware Revision : 3.2

Part Number : 73-3691-02

Board Revision : A0

Deviation Number : 0-0

Fab Version : 02

PCB Serial Number : ICP071307WD

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Processor type : 02

Number of DSP's : 3

DSP memory size(in kwords): 192

Type of DSP : TMS320C549

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 01 5C 41 03 02 82 49 0E 6B 02 42 41 30

0x10: 80 00 00 00 00 02 02 C1 8B 49 43 50 30 37 31 33

0x20: 30 37 57 44 03 00 81 00 00 00 00 04 00 09 02 FF

[pacameron]

Use the DSP calculator on CCO -

http://www.cisco.com/cgi-bin/Support/DSP/dsp-calc.pl

Product Number for DSP Modules

Number of DSPs Product Number

One PVDM-256K-4

Two PVDM-256K-8 or PVDM-256K-4U8

Three PVDM-256K-12 or PVDM-256K-4U12

Four PVDM-256K-16HD or PVDM-256K-4U16

Five PVDM-256K-20HD or PVDM-256K-4U20

Cisco 1760 Series Routers support maximum 10 DSPs by having two DSP module slots and supporting up to 5 DSPs in each slot