I have configured recently the quality of service in cisco 2801 router and in the other hand of network. The problem is when there is some files transfert users can't hear correcty others calling or called party.
You only have reserved 20 kbps for voice, I am assuming you are using g.729 codec which is still about 24 kbps. With the header-compression that you have configured this is driven down to about half of it, allowing you for one voice call. Make sure that your header copression is working as well as that the LLQ is working by running:
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...